VEX | GEAR SIMULATOR

VEX Drivetrain Gear Simulator

Build one side of a VEX drivetrain from left to right. Each box represents one shaft position. Select the gear size, add a motor if that shaft is driven, add a wheel if the wheel is on that shaft, or make the shaft compound by adding a second gear on the same shaft. Every gear mesh reverses direction, so wheel shafts must be placed carefully to make all wheels rotate the same way.

Start Simulation Example: 2 × 600 RPM Drive Example: 5.5W Geared Assist Example: 7 Gear Drivetrain Clear

Animated Drivetrain Visualisation

0W

Power on this side

0W

If mirrored both sides

0

Average wheel RPM

0.00

Estimated speed, m/s

0.00

Relative torque

Speed Indicator Low

Torque Indicator Low

×

Drivetrain Warning

Close